AGP Picks
View all

Asante Reports Strong Open Pit Extension Potential at Bibiani Main Pit

News originally published by

GlobeNewswire

VANCOUVER, British Columbia, Nov. 16, 2026 (GLOBE NEWSWIRE) -- Asante Gold Corporation (TSXV: ASE | GSE: ASG | OTCQX: ASGOF) ("Asante" or the "Company") is pleased to announce strong results from its Reverse Circulation (RC) and Diamond Drilling programme at the Main Pit Bridge area at its Bibiani Gold Mine in Ghana. Extending the Main Pit through the Bibiani Bridge would enable portions of the northern Main Pit underground Mineral Resource to be accessed from surface, potentially bringing additional Mineral Resources into the LOM plan and deferring underground development capital expenditure currently planned for 2027-2028. Management plans to accelerate drilling, assaying, and mine planning in this area, which Management believes could represent a significant positive development for Bibiani’s open-pittable material.

HIGHLIGHTS

  • Encouraging initial RC results from infill drilling at the Main Pit “Bridge”, between the Main Pit and Cut 5 has returned significant intercepts (see Appendix 1 for all results), including:
    • 60m at 3.13 Au(g/t) from 103m in hole MGRC26-763
    • 48m at 2.12 g/t Au from 42m in hole MGRC26-741, which ended in mineralization at 90m, including:
      • 24m at 2.77 g/t Au from 53m
    • 34.0m at 3.59 g/t Au from 140m in hole MGRC26-758
    • 40m at 2.76 g/t Au from 65m in hole MGRC26-743
    • 25m at 4.95 g/t Au from 119m in hole MGRC26-762B
    • 6m at 62.48 g/t Au from 136m in hole MGRC26-765
    • 16m at 5.25g/t Au from 80.0m and 17m at 4.36 g/t Au from 119m in hole MGRC26-747
  • The results to date support the continuity of broad zones of gold mineralization within the Bridge area, targeting the upgrade of Inferred Mineral Resources to Indicated up to 150m below surface
  • The total programme includes 8,000m of planned RC drilling and diamond drilling, covering approximately 350m of strike to 150m depth, testing the Bridge, the gap between Cut 5 and Cut 6, down dip extensions beneath Cut 5, as well as the northern strike extent of the parallel Elizabeth trend.
  • Results will inform an updated Main Pit Mineral Resource model and support a review of the mine plan, including the potential to extend open-pit mining and defer significant underground development expenditure.

Glenn Baldwin, Chief Development Officer, commented: “We’re very pleased with these results, which are building our confidence in the extent and continuity of mineralization between existing pits and in the potential for accessing an attractive source of open pit material, while simultaneously deferring a large capital expenditure commitment associated with initiating underground mining at Bibiani. Indicated and Inferred Mineral Resources have already been defined in the Bridge area, but they are modelled as being associated with the Main Pit underground Mineral Resource. Until now, this and any other near-surface mineralization, has not been considered for open-pit mining. Alongside the remaining drilling and test work, we are now prioritizing how best to mine this mineralization. This is an important example of our broader objective to maximize the potential of the Bibiani mine plan, improve capital efficiency, and strengthen the longer-term economics at Bibiani. We hope to update the market again as soon as possible, with further results and conclusions about the Bibiani Bridge.”

Plan view of the Bibiani Main Pit and adjacent satellite pits, showing drilling targets, completed and planned drill collars, and assay status.

Figure 1: Plan view of the Bibiani Main Pit and adjacent satellite pits, showing drilling targets, completed and planned drill collars, and assay status

Main Pit Extension Drilling Programme

In Q3-2026, the Company initiated a broader review of brownfield and greenfield exploration opportunities across its 83km Chirano-Bibiani Corridor (“CBC”). The review identified a number of priority near-mine targets with the potential to support open-pit extensions and future resource growth at Bibiani. These include the Bridge between Main Pit and Cut 5, the gap between Cut 5 and Cut 6, the down dip extension beneath Cut 5, and the northern strike extent of the Elizabeth trend (Figure 1).

Historically, drilling had focused on defining the Main Pit and underground Mineral Resources beneath the Main Pit and Cut 5. The Bridge area hosts an Indicated Mineral Resource and an Inferred Mineral Resource, which are currently incorporated into the current underground mine design (Figure 2). However, with previous mine planning focused on underground development, the Bridge received comparatively limited drilling, and the potential for an expanded open-pit operation was not fully evaluated.

The current 8,000m RC and diamond drilling programme is designed to improve confidence in the extent, grade and continuity of mineralization between the existing pits and at depth, with a view to upgrading portions of the Inferred Mineral Resource to the Indicated category. The programme will also assess the potential to incorporate mineralization currently contemplated for underground extraction into an expanded open-pit design.

Long section of the Main Pit to Cut 5, showing pierce points for the Bridge and historical drilling, coloured by gram per metre gold mineralization (GXM), with GXM contours, Indicated and Inferred Mineral Resource outlines, and significant intercepts.

Figure 2: Long section of the Main Pit to Cut 5, showing pierce points for the Bridge and historical drilling, coloured by gram per metre gold mineralization (GXM), with GXM contours, Indicated and Inferred Mineral Resource outlines, and significant intercepts.

Initial infill drilling at the Bridge has returned positive results, supporting the existing geological interpretation and providing greater confidence in the continuity of mineralization between the Main Pit and Cut 5. Significant intercepts include 60m at 3.13 Au(g/t) from 103m in hole MGRC26-763 and 48m at 2.12 g/t Au from 42m in hole MGRC26-741, including 24m at 2.77 g/t Au from 53m and 7m at 5.26 g/t Au from 69m. Hole MGRC26-741 was terminated prematurely following a drill-rig malfunction, with mineralization remaining open at the end of the hole (Figure 2 and 3a). Additional significant results include 25m at 4.95 g/t Au from 119m in MGRC26-762B and 40m at 2.76 g/t Au from 65m in MGRC26-743 (Figures: 2, 3a, 3b, and 3c).

The results will be incorporated into the updated Mineral Resource model to refine the geometry and grade distribution of mineralization within the Bridge and assess the potential for resource classification upgrades. The programme is also testing extensions to mineralization at depth beneath Cut 5, where historical drilling, including holes intersected mineralization beyond the current open pit shell. Historical intercepts include 42.8m at 6.30g/t Au from 345.0m in hole RCD-04-600, 12.0m at 5.40g/t Au from 334.2m in hole RCD-04-595A, and 32.6m at 4.01g/t Au from 236.0m in hole RCD-04-597 (Figure 2). Further drilling will test the continuity and extent of these deeper zones, their potential contribution to future Mineral Resources and an expanded open-pit design.

Cross-sections A and B through MGRC26-741 and MGRC26-758, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.

Figure 3a-3b: Cross-sections A and B through MGRC26-741 and MGRC26-758, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.

Cross-section C through MGRC26-763, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.

Figure 3c: Cross-section C through MGRC26-763, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.

Next Steps

A review of the Main Pit mine plan is underway. The current Bibiani underground plan is based on the 2025 Definitive Feasibility Study, described in the technical report entitled “NI 43-101 Technical Report and Updated Mineral Resource Estimate, Asante Gold Bibiani Limited, Ghana, West Africa” with an effective date of 31 December 2025, available under the Company’s profile on SEDAR+, which favoured an earlier transition from open pit to underground mining beneath the Main Pit. Results will be evaluated as part of this review, with the potential to inform future resource model updates and revisions to the Bibiani life of mine plan.

Drilling has now moved north of Cut 5 to test the gap between Cut 5 and Cut 6, and the Cut 5 down dip extension, where 129m of diamond drilling has been completed to date, with results pending. Drilling will also test the northern strike extent of the parallel Elizabeth trend as a potential new source of open pit mineralization. The remaining drill holes are expected to be completed in Q4 2026, with further assay results to be reported as they become available.

Any revisions to the mine plan, including potential open-pit extensions and the deferral of underground development, remain subject to further drilling and a more detailed technical and economic evaluation. No estimate of additional tonnes, grade, mine life or deferred capital expenditure has been established at this stage.

QAQC

The drilling program was conducted in accordance with industry best practices and followed drilling, sampling, QA/QC and data management procedures previously implemented by Asante. These procedures have been reviewed and validated by the Asante Gold Exploration team and various external Qualified Persons and are consistent with accepted industry standards.

Drilling was conducted by GTS Drilling Services and was supervised by the Asante exploration teams. Reverse circulation (RC) samples are collected using a face-sampling hammer bit and a rig-mounted cyclone fitted with a riffle splitter that is kept level and cleaned regularly during the drilling of the hole as conditions dictate. Cuttings are recovered on a routine 1 m basis into pre-numbered plastic bags at a target split mass of 2–3 kg, with sample condition (dry/damp/wet) and approximate recovery recorded at the rig; field duplicates are taken simultaneously from a second chute at a rate of approximately 1 in 20. Certified reference materials and coarse blanks are inserted into the sample stream by project personnel at a combined frequency of roughly 10 % (typically one CRM per 20 samples and one blank per 20 samples, with blanks preferentially placed after mineralised intervals), and all control samples are recorded on a separate QA/QC log and remain blind to the laboratory. Bags are sealed immediately with waterproof sample tickets (one portion inside the bag), grouped into larger labelled bulk bags, and stored in a secure, weather-protected area under continuous company custody until dispatch. Samples are transported to the assay laboratory by company personnel or a reputable carrier accompanied by a chain-of-custody submission form; the laboratory confirms receipt against the manifest, at which point custody is transferred. Diamond drilling is conducted at either HQ or NQ2 diameters. All holes are surveyed and orientated using industry standard down hole tools. Selected drill core intervals are cut in half with a diamond blade saw. Half of the sampled core was left in the core box and the remaining half was bagged and sealed. Asante utilizes accredited laboratories, and the samples were transported to either the Intertek laboratory on site at Bibiani or the Intertek laboratory in Tarkwa, Ghana. These procedures ensure representative sampling, minimise contamination and sampling error, and maintain a fully documented chain of custody from the drill rig to the laboratory in accordance with industry best practice

Gold was analysed by 50-gram fire assay with Atomic Absorption-finish. Certified reference material (CRM) standards, duplicates, and coarse blank material are inserted. Results from the QA/QC program indicate that assay quality is within acceptable limits and supports the reliability of the analytical data.
Drill hole collars and significant intercepts are set out in Appendix 1.

Qualified Person

The scientific and technical information in this news release has been reviewed and approved by Dean Bertram, Vice President, Geology and Exploration of Asante Gold Corporation, and a “qualified person” as defined under National Instrument 43-101. Mr. Bertram has verified the data disclosed in this news release, including drill logs, assay certificates and QA/QC results. The historical drill holes referred to in this news release and shown in Figure 2 form part of the drill hole database supporting the Mineral Resource estimate in the technical report titled “NI 43-101 Technical Report and Updated Mineral Resource Estimate, Asante Gold Bibiani Limited, Ghana, West Africa”, with an effective date of 31 December 2025, and have been verified by the Qualified Person.

CONTACT INFORMATION

Camilla Golding – Investor Relations Manager

Fred Attakumah – Executive Vice President and Country Director

investor@asantegold.com
+1 604 661 9400 or +233 303 972 147

ABOUT ASANTE GOLD CORPORATION

Asante Gold Corporation is a growing mid-tier gold producer, developer and explorer with a high-quality portfolio of assets located on two of West Africa's most prolific and prospective gold belts in Ghana. The Company operates the Bibiani and Chirano Gold Mines on the Sefwi-Bibiani Gold Belt in Ghana's Western North Region, where it holds an extensive and underexplored land position spanning more than 80 kilometres of strike. Asante is also advancing its Kubi Gold Project on the Ashanti Gold Belt, extending the Company's footprint across Ghana's most productive gold corridor. Committed to responsible mining and the creation of lasting value for its shareholders, people and host communities, Asante is listed on the TSX Venture Exchange, the Ghana Stock Exchange, and the OTCQX Market in the United States. Additional information is available on the Company’s website at www.asantegold.com.

About The Bibiani Gold Mine

Bibiani is an operating open pit gold mine situated in the Western North Region of Ghana, with historical gold production of more than 5 million ounces. The mine is fully permitted with mining and processing infrastructure on-site, including a refurbished process plant and associated mining infrastructure. Asante commenced mining at Bibiani in late February 2022, with commercial production announced on November 10, 2022.

About The Chirano Gold Mine

Chirano is an operating open pit and underground mine located in the Western Region of Ghana. The mine was first explored and developed in 1996 and began production in October 2005. Chirano comprises multiple open pit and underground operations and has produced over 3 million ounces of gold. Asante acquired the Chirano operation in August 2022.

Cautionary Statement of Forward-Looking Statements

Certain statements in this news release constitute forward-looking statements or forward-looking information. All statements, other than statements of historical fact, are forward-looking statements or information.  Forward-looking statements in this news release include statements relating to: the potential extension of the Main Pit through the Bibiani Bridge and the ability to access portions of the northern Main Pit underground Mineral Resource from surface; the potential to bring additional Mineral Resources into the life of mine plan; the potential deferral of underground development capital expenditure currently planned for 2027-2028; Management’s plans to accelerate drilling, assaying and mine planning in the Bridge area; the potential upgrade of Inferred Mineral Resources to Indicated Mineral Resources; the scope and expected timing of completion of the remaining drilling programme; the incorporation of results into an updated Main Pit Mineral Resource model; the ongoing review of the Bibiani Mineral Resource model and Main Pit mine plan and any resulting revisions to the Bibiani life of mine plan; the potential for future resource growth along the Chirano-Bibiani Corridor; and the Company’s objectives to improve capital efficiency and strengthen the longer-term economics at Bibiani. Forward-looking statements involve risks, uncertainties and other factors that could cause actual results, performance, prospects, and opportunities to differ materially from those expressed or implied by such forward-looking statements. The reader is referred to the risk factors identified in the Company’s management’s discussions and analysis and the most recent annual information form and the Company’s public disclosure record which is available on SEDAR+ (www.sedarplus.ca). Although the Company believes that the assumptions and factors used in preparing the forward-looking statements are reasonable, undue reliance should not be placed on these statements, which only apply as of the date of this news release, and no assurance can be given that such events will occur in the disclosed time frames or at all. Except as required by securities laws and the policies of the securities exchanges on which the Company is listed, the Company disclaims any intention or obligation to update or revise any forward-looking statement, whether as a result of new information, future events or otherwise.

LEI Number: 529900F9PV1G9S5YD446. Neither CIRO nor any stock exchange or other securities regulatory authority accepts responsibility for the adequacy or accuracy of this release.

Appendix 1
Table A1: Drill hole collar locations (WGS84 UTM Zone 30N)

Hole ID Type Easting (UTM) Northing (UTM) RL (m) Azimuth (°) Dip (°) Depth (m)
MGRC26-741 RC 574775.9 715743.8 186.4 304 -67 90
MGRC26-742 RC 574789.7 715712.8 186.1 304 -67 120
MGRC26-743 RC 574773.0 715634.2 185.6 304 -54 120
MGRC26-744 RC 574798.9 715821.9 192.0 304 -61 100
MGRC26-745 RC 574801.3 715849.6 192.0 304 -50 72
MGRC26-746 RC 574786.3 715800.3 188.1 304 -62 88
MGRC26-747 RC 574774.9 715633.1 185.7 304 -76 210
MGRC26-748 RC 574781.0 715695.0 186.3 304 -50 126
MGRC26-749 RC 574813.3 715898.2 196.0 304 -50 72
MGRC26-750 RC 574783.4 715692.8 186.2 304 -74 210
MGRC26-751 RC 574828.1 715917.7 198.6 304 -50 66
MGRC26-752 RC 574885.6 716140.2 198.3 304 -62 168
MGRC26-753 RC 574915.5 716080.5 205.1 304 -50 162
MGRC26-754 RC 574891.2 716144.6 198.4 304 -46 162
MGRC26-755 RC 574807.9 715783.3 192.2 304 -63 140
MGRC26-756 RC 574908.0 716032.9 205.3 304 -60 192
MGRC26-757 RC 574840.6 715933.7 202.1 304 -65 180
MGRC26-758 RC 574883.0 715984.5 202.6 304 -65 228
MGRC26-759 RC 574778.7 715741.3 186.1 304 -47 128
MGRC26-760 RC 574794.5 715597.2 181.6 304 -47 138
MGRC26-761 RC 574756.6 715663.5 185.6 304 -57 102
MGRC26-762 RC 574797.5 715596.6 181.6 304 -68 45
MGRC26-762A RC 574797.1 715596.0 181.5 304 -68 162
MGRC26-762B RC 574796.9 715593.9 181.3 304 -57 195
MGRC26-763 RC 574746.5 715521.1 131.9 304 -64 200
MGRC26-764 RC 574733.3 715556.6 131.5 304 -52 120
MGRC26-765 RC 574829.5 715655.4 183.8 304 -55 180
MGRC26-766 RC 574825.6 715538.9 174.2 304 -55 222
MGRC26-767 RC 574834.1 715653.9 183.6 304 -76 301
MGRC26-768 RC 574766.0 715640.9 185.5 304 -47 80
MGRC26-769 RC 574802.3 715745.4 185.7 304 -65 168
MGRC26-770 RC 574802.2 715745.1 185.8 304 -78 30
MGRC26-770A RC 574804.5 715743.7 185.5 304 -78 234


Table A2: Significant intercepts

Hole ID From (m) To (m) Interval (m) Au (g/t) Gram metres
MGRC26-741 9 16 7 1.20 8.4
MGRC26-741 20 23 3 0.60 1.8
MGRC26-741 42 90 48 2.12 101.8
     Including 53 77 24 2.77 66.5
     Including 69 76 7 5.26 36.8
MGRC26-742 35 46 11 0.75 8.3
MGRC26-742 63 73 10 1.62 16.2
MGRC26-743 65 105 40 2.76 110.3
MGRC26-744 1 4 3 0.93 2.8
MGRC26-744 9 11 2 0.55 1.1
MGRC26-744 67 72 5 0.82 4.1
MGRC26-745 38 43 5 1.82 9.1
MGRC26-746 33 50 17 1.86 31.6
MGRC26-747 80 96 16 5.25 84.0
MGRC26-747 108 109 1 2.30 2.3
MGRC26-747 119 136 17 4.36 74.2
MGRC26-747 197 201 4 0.74 2.9
MGRC26-748 31 32 1 1.23 1.2
MGRC26-748 45 56 11 1.00 11.0
MGRC26-748 64 67 3 0.50 1.5
MGRC26-748 73 86 13 1.28 16.6
MGRC26-749 20 23 3 1.51 4.5
MGRC26-750 92 102 10 0.75 7.5
MGRC26-750 126 128 2 1.13 2.3
MGRC26-751 6 14 8 1.44 11.5
MGRC26-751 47 50 3 0.51 1.5
MGRC26-752 126 128 2 1.18 2.4
MGRC26-753 159 162 3 1.10 3.3
MGRC26-754 93 95 2 1.90 3.8
MGRC26-755 38 59 21 2.16 45.4
MGRC26-755 79 82 3 0.97 2.9
MGRC26-755 109 114 5 1.31 6.6
MGRC26-756 No significant intercept
MGRC26-757 29 33 4 1.97 7.9
MGRC26-757 69 73 4 0.96 3.8
MGRC26-757 81 85 4 1.28 5.1
MGRC26-758 140 174 34 3.59 121.9
MGRC26-759 12 34 22 1.55 34.2
MGRC26-759 60 64 4 0.62 2.5
MGRC26-760 115 123 8 1.13 9.1
MGRC26-761 21 30 9 0.68 6.2
MGRC26-761 54 56 2 0.67 1.3
MGRC26-761 89 94 5 0.54 2.7
MGRC26-762B 104 113 9 1.57 14.2
MGRC26-762B 119 144 25 4.95 123.8
MGRC26-763 71 81 10 1.36 13.6
MGRC26-763 85 98 13 5.59 72.6
MGRC26-763 103 163 60 3.13 188.0
MGRC26-763 168 174 6 1.23 7.4
MGRC26-764 40 58 18 1.46 26.4
MGRC26-764 77 82 5 1.61 8.0
MGRC26-764 99 113 14 0.68 9.5
MGRC26-765 136 142 6 62.48 374.9
MGRC26-765 166 171 5 2.58 12.9
MGRC26-766 205 215 10 1.08 10.8
MGRC26-766 221 222 1 1.82 1.8
MGRC26-767 170 178 8 0.55 4.4
MGRC26-768 44 49 5 0.57 2.8
MGRC26-769 46 61 15 1.22 18.3
MGRC26-769 66 76 10 0.61 6.1
MGRC26-769 90 114 24 1.89 45.2
MGRC26-770A 115 117 2 0.76 1.5
MGRC26-770A 136 138 2 0.78 1.6

Notes:

1. Intercepts are calculated using a minimum cut off grade of 0.36 g/t Au and a weighted average, with no more than 3 meters of consecutive internal waste below the cut off grade. The minimum downhole interval length that triggers an intercept is 2 meters.

2. Intervals are downhole lengths. True widths are not yet known.

3. Samples were collected at 1meter intervals and analysed by Intertek Minerals at its Bibiani minesite and Tarkwa laboratories.


Primary Logo

Figure 1

Plan view of the Bibiani Main Pit and adjacent satellite pits, showing drilling targets, completed and planned drill collars, and assay status.
Figure 2

Long section of the Main Pit to Cut 5, showing pierce points for the Bridge and historical drilling, coloured by gram per metre gold mineralization (GXM), with GXM contours, Indicated and Inferred Mineral Resource outlines, and significant intercepts.
Figure 3a-3b

Cross-sections A and B through MGRC26-741 and MGRC26-758, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.
Figure 3c

Cross-section C through MGRC26-763, showing significant assay intercepts relative to the current block model, historical drill holes and the current open-pit design.

Legal Disclaimer:

EIN Presswire provides this news content "as is" without warranty of any kind. We do not accept any responsibility or liability for the accuracy, content, images, videos, licenses, completeness, legality, or reliability of the information contained in this article. If you have any complaints or copyright issues related to this article, kindly contact the author above.

Share this page:

Advanced Search Options

Search for:

Search scope:

Type:

Search in:

Date range:

The last

Sort by:

Sign up for:

Liechtenstein Business Focus

The daily local news briefing you can trust. Every day. Subscribe now.

By signing up, you agree to our Terms & Conditions.